SAFE-TECH – Create My Own Interlinked Bundle

Depending on your selection, each device consists of the following:

AJ-718i – Interconnected Heat Alarm

1 x AJ-718i Wireless Interlinked Heat Detector
1 x 3.0V Lithium Battery Built-in
1 x Wall Mounting Bracket
2 x Screws with Wall Plugs
1 x User Manual

AJ-763i – Interconnected Smoke Alarm

1 x AJ-762i Wireless Interconnected Interlinked Smoke Alarm
1 x 3V CR123A Lithium Battery(built-in)
1 x Wall Mounting Bracket
2 x Screws with Wall Plugs
1 x User Manual

AJ-833Si – Interconnected CO Alarm

1 x AJ-833si Interlinked Carbon Monoxide Alarm
1 x Wall Mounting Bracket
2 x Screws with Wall Plugs
1 x User Manual

AJ-R1062 – Interconnected Remote Control

1 x AJ-R1062 Wireless Interlinked Remote Control
1 x User Manual
Note: Remote Control ONLY, Alarms sold separately

QUICKSTART GUIDE

Model No: AJ-718i

Conform with the provisions of the:

• Construction Products Regulation (EU) No. 305/2011 of the EUROPEAN parliament and of the Council of 9th March 2011
• Regulation (EU) No: 2014/53/EU
• Applied Standard: BS 5446-2:2003

Can connect with up to 50 SAFE-TECH devices. If one alarm goes off, all connected SAFE-TECH devices will go off. The alarm will cover the whole house even if you are in another room. A loud 85-decibel siren is designed to wake even the soundest of sleepers.

Suitable for horizontal mounting in the living room, stair crawl space, storage room, kitchen, boiler room, power generation room, drying room, and smoking room, where the relative humidity is often greater than 95%. Dusty workshops and other spaces where smoke detectors are not suitable for installation.

Using a sensitive temperature sensor, when the ambient temperature exceeds 136.4°F (58°C), it can quickly emit a sound greater than 85dB and a warning light alarm. Sound and light alarms are issued to warn you more comprehensively of danger.

Please test the product once a week to ensure that the product is operating normally. Clean around the temperature probe once a year to ensure that there are no blockages (dust, small bits of paper, etc.)

* Battery life may vary based on configuration, application usage, power management settings, and features.
* We try to get you the best quality photo and size. However, all pictures shown here are for illustration purposes only. Actual product size and colour may vary slightly.

Model No: AJ-763i

Conform with the provisions of the:

• Construction Products Regulation (EU) No. 305/2011 of the EUROPEAN parliament and of the Council of 9th March 2011
• Regulation (EU) No: 2014/53/EU
• Applied Standard: EN 14604:2005/AC2008

A smart modern design wireless interconnected fire alarm/smoke alarm, compatible with other Safe-Tech detectors (CO detector, Remote controller, WiFi interconnected smoke alarm) to create a wireless safety network. We suggest a maximum of 20-50 pcs connected on one building floor for best connection performance.

With the latest Radiolinked technology, if one alarm goes off, all alarms will go off. The alarm with a loud 85-decibel siren is designed to cover the whole house and even wake the soundest sleepers.

Built-in sealed 3V Li-battery that can last up to 10 years*. No battery replacement within 5-8 years is needed, which will save money and time for replacing the battery. Longer battery life, safety guarantee!

Big test and Hush button and remote controller (not included). The test button is larger than the traditional smoke alarm, and the button can be easily released in the event of a false alarm without tools. A remote controller (not included) helps to test & silence the alarm.

* Battery life may vary based on configuration, application usage, power management settings, and features.
* We try to get you the best quality photo and size. However, all pictures shown here are for illustration purposes only. Actual product size and colour may vary slightly.

Model No: AJ-833Si

SAFE-TECH Interlinked Carbon Monoxide Detector places the highest priority on safety. Also, this alarm meets the British standard for CO Alarms, BS EN 50291-1:2018. Additionally, this alarm is tested to meet UKCA and CE standards.

This detector has an advanced electrochemical sensor. Therefore, it detects even the smallest rise in CO levels, giving a quick response to potential CO poisoning. Also, this detector has a 10-year tamper-proof battery. Lasting for 10 years and guaranteeing continuous protection.

This Interlinked Carbon Monoxide Detector is compliant with the latest Scottish Legislation. Making it Suitable for any room that has a carbon-burning fuel appliance. CO alarm density is as follows :

50ppm alarm does not activate within 120 minutes.
50-100ppm, an alarm within 80 minutes.
100-300ppm, an alarm within 30 minutes.
300ppm, an alarm within 50 seconds.

Model No: AJ-R1062 – NEW GENERATION!

The wireless interlinked remote controller is a supplementary device that works with the SAFE TECH AJ wireless interlinked smoke alarms, carbon monoxide detectors, wireless heat alarms, and other AJ Interlinked Series.

According to the regulation, the detectors should be tested weekly to ensure the detectors are working properly. By installing the remote controller on the wall, you can easily test the smoke alarm by simply pressing the “TEST” button on the remote controller. The silence function is available only when the detector is triggered. Do not press the “Hush” button during testing; the detectors will automatically be silenced after 8-15 seconds.

If one of the detectors is triggered, all the detectors in the group will sound. Pressing the “Hush” button, all the detectors will be silenced, except the detector that detected the real fire. So you can easily spot which floor or area has triggered.