3 Phase Distribution Boards
- 4 x Triple Way Board
- Fully shielded neutral bars
- Earth and neutral bar capacity 25mm²
- For use with single pole , double pole and triple pole MCB's, plus RCBO's [sold separately]
- Outgoing MCBs available up to 63A B, C or D curves
- Plug on outgoers for speeds of installation and guaranteed connection
- Boards accept DIN control products [timers, contactors] in any unused outgoing way without adaptation
- Control wiring cable way integrated to moulding
- 6 x Triple Way Board
- Fully shielded neutral bars
- Earth and neutral bar capacity 25mm²
- For use with single pole , double pole and triple pole MCB's, plus RCBO's [sold separately]
- Outgoing MCBs available up to 63A B, C or D curves
- Plug on outgoers for speeds of installation and guaranteed connection
- Boards accept DIN control products [timers, contactors] in any unused outgoing way without adaptation
- Control wiring cable way integrated to moulding
- BSEN61439-1 Compliant
- 250A rated
- Range of internal incomers for all applications including lugs, switches, RCCBs and MCCBs
- Outgoing MCBs available up to 63A B and C curves
- 18mm wide RCBO available, minimising use of outgoing ways
- A higher performance level than a consumer unit
- Modular solution which is flexible
- Metering and integral control options
- Surface mounting
- Knockout cable entry
The LoadCentre iKQ range of single and three phase distribution boards give a flexible solution for protection, metering, switching and control.
The Schneider SE125SW3L is a 125A triple pole and neutral, incoming switch isolator for use with three phase, type B, iKQ LoadCentre distribution boards.
The LoadCentre iKQ range of single and three phase distribution boards give a flexible solution for protection, metering, switching and control.
The Schneider SE125SW4 is a 125A four pole incoming switch isolator for use with three phase, type B, iKQ LoadCentre distribution boards.
The Schneider SE10C106 is a 6A 10kA rated, single pole, Type C Miniature Circuit Breaker (MCB). It is suitable for use with Loadcentre distribution boards. It is used to protect against short circuit currents and overload currents. There is a red mechanical indicator in the front of the MCB which acts as a fault trip indicator.
The Schneider SE10C110 is a 10A 10kA rated, single pole, Type C Miniature Circuit Breaker (MCB). It is suitable for use with Loadcentre distribution boards. It is used to protect against short circuit currents and overload currents. There is a red mechanical indicator in the front of the MCB which acts as a fault trip indicator.
The Schneider SE10C116 is a 16A 10kA rated, single pole, Type C Miniature Circuit Breaker (MCB). It is suitable for use with Loadcentre distribution boards. It is used to protect against short circuit currents and overload currents. There is a red mechanical indicator in the front of the MCB which acts as a fault trip indicator.
The Schneider SE10C132 is a 32A 10kA rated, single pole, Type C Miniature Circuit Breaker (MCB). It is suitable for use with Loadcentre distribution boards. It is used to protect against short circuit currents and overload currents. There is a red mechanical indicator in the front of the MCB which acts as a fault trip indicator.
The Schneider SE10C140 is a 40A 10kA rated, single pole, Type C Miniature Circuit Breaker (MCB). It is suitable for use with Loadcentre distribution boards. It is used to protect against short circuit currents and overload currents. There is a red mechanical indicator in the front of the MCB which acts as a fault trip indicator.
The Schneider SE10C150 is a 50A 10kA rated, single pole, Type C Miniature Circuit Breaker (MCB). It is suitable for use with Loadcentre distribution boards. It is used to protect against short circuit currents and overload currents. There is a red mechanical indicator in the front of the MCB which acts as a fault trip indicator.
The Schneider SE10C163 is a 63A 10kA rated, single pole, Type C Miniature Circuit Breaker (MCB). It is suitable for use with Loadcentre distribution boards. It is used to protect against short circuit currents and overload currents. There is a red mechanical indicator in the front of the MCB which acts as a fault trip indicator.
This Acti9 iKQ product is a low voltage miniature circuit breaker (MCB). It is a 1P circuit breaker with 1 protected pole and 10A In rated current and D tripping curve. The Icn rated short circuit breaking capacity is up to 10000A at 240VAC conforming to EN/IEC 60898-1 standard. This product is compliant with EN/IEC 60898-1 standard. This miniature circuit breaker protects circuit against short circuit and overload current. The trip free mechanism operates even when the toggle is locked on. There is a positive contact indication to be guaranteed with on/off indication. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 240VAC. The Ui rated insulation voltage is 440VAC. The Uimp rated impulse withstand voltage is 4kV. The operating frequency is 50Hz or 60Hz. It can be mounted on DIN rail for modular installation. Its width is 2 pitches of 9mm. The product colour is white (RAL9003). The dimensions are (W) 18mm x (H) 85mm x (D) 78.5mm. The weight is 0.121kg. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure.
The Schneider Electric SE10D116 is a single pole Miniature Circuit Breaker (MCB) which can be used in LoadCentre KQ distribution boards. This MCB has a current rating of 16A and a type D tripping curve (magnetic setting 10-14 in). It also has a 25mm² cable capacity and is designed for highly reactive loads, such as motors, pumps and transformers.
The Schneider Electric SE10D120 is a single pole Miniature Circuit Breaker (MCB) which can be used in LoadCentre KQ distribution boards. This MCB has a current rating of 20A and a type D tripping curve (magnetic setting 10-14 in). It also has a 25mm² cable capacity and is designed for highly reactive loads, such as motors, pumps and transformers.
This Acti9 iKQ product is a low voltage miniature circuit breaker (MCB). Trip free mechanism that operates even when the toggle is locked on Lockable in the on or off position This product is compliant with EN/IEC 60898-1 standard. This miniature circuit breaker protects circuit against short circuit and overload current. The trip free mechanism operates even when the toggle is locked on. There is a positive contact indication to be guaranteed with on/off indication. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 240VAC. The Ui rated insulation voltage is 440VAC. The Uimp rated impulse withstand voltage is 4kV. The operating frequency is 50Hz or 60Hz. It can be mounted on DIN rail for modular installation. Its width is 2 pitches of 9mm. The product colour is white (RAL9003). The dimensions are (W) 18mm x (H) 85mm x (D) 78.5mm. The weight is 0.121kg. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure.
The Schneider SE10D163 is a 63A 10kA rated, single pole, Type D Miniature Circuit Breaker (MCB). It is suitable for use with Loadcentre distribution boards. It is used to protect against short circuit currents and overload currents. There is a red mechanical indicator in the front of the MCB which acts as a fault trip indicator.
The Schneider SE10C306 is a 6A 10kA rated, triple pole, Type C Miniature Circuit Breaker (MCB). It is suitable for use with Loadcentre distribution boards. It is used to protect against short circuit currents and overload currents. There is a red mechanical indicator in the front of the MCB which acts as a fault trip indicator.
The Schneider SE10C316 is a 16A 10kA rated, triple pole, Type C Miniature Circuit Breaker (MCB). It is suitable for use with Loadcentre distribution boards. It is used to protect against short circuit currents and overload currents. There is a red mechanical indicator in the front of the MCB which acts as a fault trip indicator.